G170ETN01.0 Color TFT LCD Module AUO 17" inch TFT Display Industrial LCD Panel

1.Introduction of the G170ETN01.0 Color TFT LCD Module This specification applies to the 17 inch Color TFT-LCD Module G170ETN01.0. The display supports the SXGA (1280(H) x 1024(V)) screen format and 16.2M colors (RGB 6-bits+Hi-FRC data).All input signals are 2 Channel LVDS interface compatible....

Details

1.Introduction of the G170ETN01.0 Color TFT LCD Module

This specification applies to the 17 inch Color TFT-LCD Module G170ETN01.0. The display supports the SXGA (1280(H) x 1024(V)) screen format and 16.2M colors (RGB 6-bits+Hi-FRC data).All input signals are 2 Channel LVDS interface compatible. This module embbededs an LED driver on it.

2.Specification of the G170ETN01.0 Color TFT LCD Module

Panel Brand:

AUO

Panel Model:

G170ETN01.0

Panel Type:

ai-Si TFT-LCD, LCM

Panel Size:

17.0 inch

Resolution:

1280(RGB)x1024,SXGA

Display Mode:

TN, Normally White, Transmissive

Active Area:

337.92x270.336 mm

Outline:

358.5x296.5x18 mm

Suface:

Antiglare , Hard coating (3H)

Brightness:

350 cd/m2 (Typ.)

Viewing Angle:

85/85/80/80

Lamp Type:

WLED Embedded (LED Driver)

Signal Interface:

LVDS ( 2ch, 8-bit ), 30 pins

Input Voltage:

5.0V (Typ.)

Application:

Industrial

3.Detail of the G170ETN01.0 Color TFT LCD Module


图片9.jpg

图片10.jpg


4.Handing Precautions of the G170ETN01.0 Color TFT LCD Module

1)Do not open nor modify the module Assembly.

2)After installation of the TFT module into an enclosure, do not twist nor bend the TFT module even momentary. At designing the enclosure,it should be taken into consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the TFT module may be damaged.

3)Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4)Do not press the reflector sheet at the back of the module to any directions.

4.Handing Precautions of the G170ETN01.0 Color TFT LCD Module

1)Do not open nor modify the module Assembly.

2)After installation of the TFT module into an enclosure, do not twist nor bend the TFT module even momentary. At designing the enclosure,it should be taken into consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the TFT module may be damaged.

3)Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4)Do not press the reflector sheet at the back of the module to any directions.

5.Why purchase from Hongkong Chance Technology CO., LTD?

Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.

1.jpg

Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.

2.jpg

Safe transportation: Fast and safe transportation that ensures safety of your merchandise.

3.jpg

Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.

4.jpg

6.How we do business

Step1.Issue P.O to us

Issue Purchase Order (P.O) to Us via E-mail.

Step2.We will sign back your P.O and Issue P.I

When we receive your P.O , We will sign back via E-mail. Meantime We will also issue Porforma Invoice P.I to you. 

Step3.Payment

Please sign back P.I and follow the payment terms.

Step4.Fax payment receipts to us

Please fax or E-mail bank receipts after wire the payment.

Step5.Shipment

All the shipment details are based on the terms of P.I.

7.Operating Precautions of the G170ETN01.0 Color TFT LCD Module

1)At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the interface Connector of the TFT module.

2)Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.

3)When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

In case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the

CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT module may be damaged.

8.Quality Assurance of Display Panel

Products can replace free within 10 days after customers Delivered-Signed if it cannot use due to the quality problems, in the precondition of non-artificial damage. We pay for the freight only for the replacement delivery.

The warranty time is 12 months. Within Warranty period, products under serviceable,we will offer the repair service for free,customers afford the cost of the parts. Customers afford the freight.

Even if within the warranty period, if the following occurs, the repair service is not available.

1.The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration.

2.The damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damage.

3.The product malfunction caused by the fall and transportation failures after purchase.

4.The malfunction and damaged caused by the other barriers (man-made factors or external device).

Any problems in the after-sales service, please contact our agents or us directly.



If you're looking for the g170etn01.0 color tft lcd module auo 17" inch tft display industrial lcd panel, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.

Feedback

Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Chance
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Product
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Copyright © Hong Kong Chance Technology Co.,Ltd All Rights Reserved.