1.Introduction of the 5.7" 320x240 STN LCD Panel SP14Q006 LCD
This module is a 5.7" QVGA TFT with 3 by 4 format,which is composed of amorphous silicon.Each sub-pixel (dot) on the LCD is vertical stripe type arranged as R (red), G (green), B (blue) color sequentially.The bounding technology, COG (chipi on glass), and LED backlight design have been applied on this displa RoHS compliant.
Display for Industrial Machine
Measuring Instrument, Chart Recorder, Scale
POS, ATM, Bank Terminal
Fish Finder, Musical Instrument, Sewing Machine
Copier Machine, FAX
2.Specification of the 5.7" 320x240 STN LCD Panel SP14Q006 LCD
STN-LCD , LCM
STN , Black/White mode, Transmissive
220 cd/m2 (Typ.)
1 PCS CCFL Without Driver
Parallel Data (4-bit), 14pins
3.3/5.0 V (Typ.)
3.Detail of the 5.7" 320x240 STN LCD Panel SP14Q006 LCD
4.Why purchase from Hongkong Chance Technology CO., LTD?
Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.
Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.
Safe transportation: Fast and safe transportation that ensures safety of your merchandise.
Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.
5.PRECAUTION IN DESIGN of 5.7" 320x240 STN LCD Panel SP14Q006 LCD
5.1LC DRIVING VOLTAGE (VEE) AND VIEWING ANGLE RANGE
Setting VEE out of the recommended condition will be a cause for a change of
viewing angle range.
5.2Touching the polarizer or terminal pins with bare hand should be avoided to prievent staining and poor electrical contact.
5.3POWER ON SEQUENCE
Input signals should not be applied to LCD module before power supply voltage is
applied and reaches to specified voltage (VDD).
If above sequence is not kept, C-MOS LSIs of LCD modules may be damaged due
to latch up problem.
6.CAUTION FOR OPAERATION of 5.7" 320x240 STN LCD Panel SP14Q006 LCD
1)It is an indispensable condition to drive LCDs within the specified voltage limit since the higher voltage than the limit causes the shorter LCD life. An electrochemical reaction due to direct current causes LCDs undesirable deterioration , so that the use of direct current driver should be avoided.
2)If the display area is pushed hard during operation, some font will be abnormally displayed but it resumes normal condition after turning off once.
3)A slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. Please operate the LCD module under the relative condition of 40℃ 85%RH.
7.How we do business
8.Quality Assurance of Display Panel
If you're looking for the 5.7" 320x240 stn lcd panel sp14q006 lcd liquid crystal display sp14q006 16pins signal original from hitachi, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.