1.Introduction of the LCD Module LM213XB Original 5.8" STN LCD
This module is a 5.8" TFT with 3 by 4 format,which is composed of amorphous silicon.Each sub-pixel (dot) on the LCD is vertical stripe type arranged as R (red), G (green), B (blue) color sequentially.The bounding technology, COG (chipi on glass), and LED backlight design have been applied on this displa RoHS compliant.
Display for Industrial Machine
Measuring Instrument, Chart Recorder, Scale
POS, ATM, Bank Terminal
Fish Finder, Musical Instrument, Sewing Machine
Copier Machine, FAX
2.Specification of the LCD Module LM213XB Original 5.8" STN LCD
STN-LCD , LCM
STN , Yellow/Green (Positive), Reflective
8-bit Parallel, 20pins
5.0 V (Typ.)
3.Detail of the LCD Module LM213XB Original 5.8" STN LCD
4.Why purchase from Hongkong Chance Technology CO., LTD?
Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.
Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.
Safe transportation: Fast and safe transportation that ensures safety of your merchandise.
Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.
5.PACKAGING of LCD Module LM213XB Original 5.8" STN LCD
5.1Foggy dew deposited on the surface due to coldness will be caused for polarizer damage, stain and dirt on product. When necessary to take out the products from some place at low temperature for test, etc. It is required for them to be warmed up in a container once at the temperature higher than that of room.
5.2Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton.
5.3As the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene ,ethanol and isopropyl alcohol..
6.CAUTION FOR OPAERATION of LCD Module LM213XB Original 5.8" STN LCD
1)If the display area is pushed hard during operation, some font will be abnormallydisplayed but it resumes normal condition after turning off once.
2)Response time will be extremely delayed at lower temperature than the operating temperature range and on the other hand at higher temperature LCDs show dark blue color in them. However those phenomena do not mean malfunction or out of order with LCDs which will come back in the specified operating temperature range
3)A slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. Please operate the LCD module under the relative condition of 40℃ 85%RH.
7.How we do business
8.Quality Assurance of Display Panel
If you're looking for the lcd module lm213xb original 5.8" stn lcd from hitachi reflective display mode, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.