Details
LG Display LD070WS2-SL07 7.0 inch 1024x600 Industrial LCD Panel LD070WS2-SL07
1.General Descriptoin of LG Display LD070WS2-SL07
The LD070WS2 is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode(LED)
backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive
type display operating in the normally Black mode. This TFT-LCD has 7.0 inches diagonally measured
active display area with WSVGA resolution(1024 horizontal by 600 vertical pixel array). Each pixel is divided
into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the
brightness of the sub-pixel color is determined with a 6-bit + 2-bit FRC gray scale signal for each dot, thus,
presenting a palette of more than 16,772,216 colors.
The LD070WS2 has been designed to apply the interface method that enables low power, high speed, low
EMI.
The LD070WS2 is intended to support applications where thin thickness, low power are critical factors and
graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the
LD070WS2 characteristics provide an excellent flat display.
2.General Features
Active Screen Size | 7.0 inches diagonal |
Outline Dimension | 162.8mm x102.9mm x 2.47mm (Typ.) |
Dot Pitch | 0.050mm x 0.150mm |
Pixel Format | 1024 horiz. By 600 vert. Pixels RGB strip arrangement |
Color Depth | 6-bit + 2-bit FRC, 16,7M colors |
Luminance, White | 400 cd/m2 (Typ.) |
Weight | 95g(Max.) |
Display Operating Mode | Transmitting type, normally Black |
Surface Treatment | Hard coat on the polarizer |
3.Detail of Industrial LCD Panel LD070WS2-SL07
4.Handling precautions for protection film
(1) When the protection film is peeled off, static electricity is generated between the film and polarizer.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
(2) The protection film is attached to the polarizer with a small amount of glue. If some stress is applied
to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to
remain on the polarizer.
Please carefully peel off the protection film without rubbing it against the polarizer.
(3) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of glue still on the polarizer after the protection film is peeled off.
(4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige is
recognized, please wipe them off with absorbent cotton waste or other soft material like chamois
soaked with normal-hexane
7.0", 1024×600, 8-bit, LVDS, 2D, WLED, Flat, LCM Hot Model
Display Model Size Resolution Luminance C/R
HV070WSA-100 | 7.0" | 1024x600 | 400 | 900:1 |
BP070WS1-500 | 7.0" | 1024x600 | 400 | 900:1 |
LD070WS2-SL01 | 7.0" | 1024x600 | 400 | 800:1 |
LD070WS2-SL07 | 7.0" | 1024x600 | 400 | 800:1 |
M070GWT4 R0 | 7.0" | 1024x600 | 500 | 800:1 |
LMS700JF04-0 | 7.0" | 1024x600 | 400 | 700:1 |
EJ070NA-01F | 7.0" | 1024x600 | 250 | 700:1 |
TM070DDH01 | 7.0" | 1024x600 | 250 | 500:1 |
HV070WS1-100 | 7.0" | 1024x600 | 400 | 800:1 |
CLAA070NP01 | 7.0" | 1024x600 | 250 | 500:1 |